Gidrosistemy

Jet Pump for Hydrodynamic and Production Logging Survey (UEOS-4) is designed for stimulation of oil production, clean out of the near well-bore zone of the reservoir, for the pressure build-up and PLT surveys.

UEOS 4B jet pump is functionally equal to UEOS-4 jet pump. However, the outer diameter of the body is 128mm (5 inches), it should be operated in the wells with body having an inside diameter not less than 140 mm (5,5 inches).

UEOS-5 device for well development and oil production is used to intensify the call flow of oil with simultaneous cleaning of bottomhole formation zone, hydrodynamic and geophysical research of well.

EG-1

LIGE-70 Ejector intends for well development by preparing liquid-gas mixtures and their injection in wells to create pressure drawdown.

Mechanical packers are intended to be used for separation of the reservoir from the annular space or two reservoirs from one another.

Collet fishing tools are intended to be used for grabbing and retrieving the cartridge units having relevant retention knobs 0.9, 1.2 and 1.4 inches in diameter.

Tubing tester valves are intended to be used for pressuring run in hole flow columns by creating the appropriate pressure in the tubing.

Mechanical jars are intended to be used for creation of upward-directed shock pulses when retrieving the cartridge units. Varisized jars are produced for use in appropriate tubing.

Containers are intended to be used for bottomhole pressure gauge installation and their safe descent into the well on tubing for prosecution of research. Containers have special chambers, where two pressure gauges can be placed.

Our company offers a basic range of standard hydraulic power units with immersed gear whell pumps and oil filtration on the drain line.

Hydraulic cylinders are used in pressure equipment, punching, weight lifting, pre-packing, packaging, clamping, installation, drawing, deformation, testing and any other working activities, that require great effort. Our equipment is used everywhere from Iraq to the Arctic. 

We have an experience in manufacture of test stands and equipment for the shipbuilding industry, aviation, defense industry etc.