Proline Industrial Valves

These Isolation Valves Also Known as Non-Return Valves. This NRV is much stronger, lighter & Superior Quality in Flow Parameters Compared to Swing Check Valves.

We manufacture, supply and export in anywhere India & UAE with the fastest delivery option.

Features Of Our Dual Plate Check Valves:

1. Only Dual Plate Check Valve which can be installed, for flow upside down due to Spring Assisted Closure
2. High Torsion Inconel Springs for Quick Closing; Valve Closes before Flow Reversal at Zero Velocity.
3. Light in Weight so Easy to Install, Less Bolting and Maintenance
4. Soft Seated Construction Available For Bubble-Tight Shutoff And Metal Seat Leakage Rate 3cc/Min/In
5. The same Valve Can Be Installed Horizontally Or Vertically.

Material Option Of Our Dual Plate Check Valves

SIZE: 25 MM TO 600 MM – 1 “- 24”
BODY: C.I. ASTM A 216 WCB /WC6//WC9/CF8 / CF8M
DISC: AISI 410 (13% CR.) /AISI 304/316/304L/316L
SEAT: AISI 410 (13% CR.) /AISI 304/316/304L/316L+ STELLITE OPTIONAL
HINGE PIN: AISI 410 (13% CR.) /AISI 304/316/304L/316L
PRESSURE RATING: 150# TO 1500#
END CONNECTION: FLANGED END AND BUTTWELD END JOINT GASKET: CAF / B8 / COMPRESSED ASBESTOS FIBER / SS 304 SPIRE WOUNDED WITH CAF INSP & TEST STD: BS 6755/API 6D /API 598
SPECIAL TYPE: WITH BYPASS ARRANGEMENT VALVE ON REQUEST

Manufacturer & Exporter of Round Body, Square Body, Compact type P, Pencil type Pneumatic Cylinder.

Our Pneumatic Cylinder are Manufactured As per Various Standard and Customized Requirement Include DIN ISO 6432, ISO 15552 & VDMA 24562 Various Option Includes Magnetic and Non Magnetic Cylinder, Mounting Adjustable Cushions and Permanent Magnet for Proximity Sensors, Reed Switches, Double End Cylinder, Standard Cylinder, Pencil Cylinder Various Mounting Like Rod eye Adapter, Fish Eye Adapter, Axes Adapter, I-Pin Adapter, Twin Rod Cylinder, TC Center Trunnion Mounting, Leg Bracket Mounting, Male Clave Mounting, Female Clave Mounting, Twin Rod Cylinder, Rod-Eye Mounting, Fork Mounting and Pivot Mounting Cylinder.

Features Of Our Pneumatic Cylinder Valves:

1. Cylinder Barrels are High-Strength Aluminum Alloy
2. Piston Rod Hard Chrome Plated
3. Long Seal and Bearing Life.
4. Lower Maintenance Costs & Smooth Operation
5. Trouble-Free Installation and Extended Service Life
6. Multiple Mounting Configurations Are Possible
7. Special Mountings for Pneumatic Cylinders are available on Request

Material Option Of Our Pneumatic Cylinder Valves:

Type: Square Body, Round Body, Compact Pencil Type
Operation: Doble Acting Type And Single Acting Type
Bore Size: 32 Mm To 100 Mm – 1.1/4 “- 4”
Stroke Size: Up To 1000 Mm
Barrel: Aluminum/ M.S. Stainless Steel
End Cover: Aluminium, Cast Iron, S.S.
Seals: Buna-N / Viton
Temperature: Up To 85°C (High Temperature On Request)
Working Pressure: 0 To 10 Bar
Various Mounting: Available On Request

Manufacturer & Exporter of 2/2 and 3/2 way Direct Acting Types Solenoid Valves. In the De-Energized Condition, the Core Spring Holds the Seat & Seal to the Solenoid Core, by Assisted Pressure of the Fluid. Due to which the Flow is Shutting to be off.

We manufacture, supply and export in anywhere India & UAE with the fastest delivery option.

Features Of Our Direct Acting Solenoid Valve:

1. IP 65, IP 67, IP 68 Protection Class, Dust Proof, Flame Proof, Water Tight Enclosure
2. Local position Indicator, Adjustable mechanical stoppers, Space Heater, Dry Potential Free Contact Output for
3. Remote Place Feedback Indication Option.
4. Limit Switches (1 NO+1 NC)- 2 Nos. (Rating 10A – 250 VAC)
5. Auxiliary limit switches – (1 NO + 1NC) – 4NOs & Torque limit switches (1NO + 1NC) – 2NOs. (for Higher Models)
6. A positioner is available in field/panel mounted to accept 4-20mA/D-10 V DC control signal & Rx Output with Servo Controller.
7. Local control station Integral Starter Optional On Request with Additional Access.

Material Option Of Our Direct Acting Solenoid Valve:

Type: Normally Close/Open
Size: 8 Mm To 15 Mm – 1/4 “- 1/2”
Body: Brass, Astm 351 Cf8 / Cf8M
Seat & Seals: Nbr,Viton,Epdm,Ptfe
Plunger: Stainless Steel
Temperature: Up To 85°C (High Temperature On Request)
Working Pressure: Upto 70 Bar
Coil Voltage: All Standard Voltage Are Avaliable
Coil Rated: Continuous Rated With Class (F)-(H) Insulation
Ends: Screwed End
Media: Vaccum, Air, Water, Oil, Gas & Chemical

We offer a wide range of 2 Port Solenoid Valves to suit a variety of applications. These valves can be basically classified as Normally Closed or Normally Open based on the valve condition when the solenoid is energized. Further, they can be classified as Direct Acting, Diaphragm Operated, Internal / External Pilot Operated.

We manufacture, supply and export in anywhere India & UAE with the fastest delivery option.

Features Of Our Pneumatic Diaphragm Operated Solenoid Valve:

1. 2/2 Ways Diaphragm Solenoid Valves has High flow capacity.
2. Diaphragm Solenoid Valve is Compact in Design & Light in Weight.
3. Diaphragm Solenoid Valves Need Full Power at All Times to Open and Stay Open
4. Pilot Operated Diaphragm Solenoid Valves are Tight Shut Off
5. Diaphragm Solenoid Valves are Widely used for High-Speed Cycling

Material Option Of Our Pneumatic Diaphragm Operated Solenoid Valve:

1. Actuator Type: Diaphragm Type Normally Closed / Normally Open
2. Size: 15 Mm To 100 Mm – 1/2 “- 4”
3. Body: Cf8, Cf8M
4. Diaphragm: Diaphragm (Nitrile/Neoprene/EPDM/Viton)
5. Temperature: -5°C To 85°C Above On Request
6. Working Pressure: 0.5 To 10 Bar
7. Coil Voltage: All Standard Voltage Are Available
8. Coil Insulation: Class “F” & Class “H”
9. Coil Enclosure: Wheather Proof Ip 67, Flame Proof Ex Ii B Inc.
10. Ends: Screwed End, Flange Ends, Tri-Clover Ends
11. Media: Air, Water, Gas & Free Flowing Chemicals

Manufacturer & Exporter of 2 Way Dust Collector Pulse Jet Solenoid Valve. Proline makes 2/2 Way Angle Type Dust Collector Pulse Valves are designed for Quick Open and Close, Which Results in Effective Cleaning & Air Consumption.

These Main Pulse Valves have just one Moving Part, the high-quality Diaphragm. Our Pulse Valves has High Flow Rates with Long Operational Life. Our Pulse Valves Has High Speed in Operation, Due to this Dust from Filter Bags is Free while Operation Time.

We manufacture, supply and export in anywhere India & UAE with the fastest delivery option.

Features Of Our Dust Collector:

1. Pulse Jet Solenoid Valves has High Flow Rate.
2. Pulse Solenoid Valve has Spring-Less Compact Design & Simple Commissioning.
3. Dust Collector Can Be Mountable In Any Position.
4. Pulse Jet Bag Filters Solenoid Valve Has Long Working Life.
5. Pulse Valves has Less Power Consumption and Lower Air Consumption

Material Option Of Our Dust Collector:

1. Size: 15 Mm To 50 Mm – 1/2 “- 2”
2. Body: Aluminum Die Cast, Cf8, Cf8M
3. Diaphragm: Diaphragm (Nitrile/Neoprene/Pu)
4. Temperature: -5°C To 80°C (125 °C Above On Request)
5. Working Pressure: 0.6 To 8 Bar
6. Coil Voltage: All Standard Voltage Are Available
7. Coil Rated: Continuous Rated With Class F Insulation
8. Ends: Screwed End, Flange Ends, Tri-Clover Ends, Union Ends
9. Media: Free Flowing Air

Manufacturer & Suppliers Pneumatic Rotary Air Actuators Operated Ball Valves. Pneumatic Actuators are widely used among Actuators. As These Are Simple in Construction, Have Less Maintenance and Low-Cost Effective in Valves Automation Industries.

Proline Industrial Valve Pneumatic Actuator is available in Double Acting Type or Single Acting Type. Double Acting Pneumatic Actuator Ball Valve Uses Air to Open and Air to Close. Where Single Acting Air Actuator Ball Valves uses Air Pressure to open and Springs to close the valve. (Failsafe) Closed Condition.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Pneumatic Ball Valve:

Pneumatic Actuator Ball Valves Give Greater Flows, Wider Media Compatibility.
Ball Valves Has Both Side Seals Covered of Internal Ball, And Can Give Tight Shut Off After Years of Cycle Operation.
Body Extruded Aluminium Hard Anodized for Corrosion Protection & Wear Resistance.
Actuator Compact Modular Design Provides Direct Mounting on Ball Valves.
Quick opening & closing, Long Life in Working Cycle
Actuators Have High Bore Finished and are Factory Lubricated for Good Life Cycle in Normal Conditions.

Material Option Of Our Pneumatic Ball Valve:

Flow Pattern: 2 Way, 3 Way, 4 Way & 5 Way
Size: 15 Mm To 400 Mm – ½ “- 16”
Body: C.I,Wcb, Cf8, Cf8M, P.P, Upvc, Lined, Forged
Ball: Cf8, Cf8M, P.P, Upvc, Lined
Shaft: Aisi 304, 316, Monel
Seat: Rptfe, Teflon, Peek,Gft, Metal To Metal
Pressure Rating: ANSI 125 #, 150 #, 300 #, 800#
Ends: Screwed Type, Socket Weld Type, Flanged Type, Tc End
Leakage: Tight Shut-Off To Class Vi
Manual Operation: Can Be Provided As An Additional Feature
Accessories: Air Lock Relay, Pneumatic To Pneumatic Valve Positioner, Electro-Pneumatic Valve Positioner With In Build Position Indicator, Rotary Limit Switches, Proximity Switches Solenoid Valves

Manufacturer & Suppliers Pneumatic Rotary Air Actuators Operated Butterfly Valves. Pneumatic Actuators are widely used among Actuators. As These Are Simple in Construction, Have Less Maintenance and Low Cost Effective in Valves Automation Industries.

Proline Industrial Valve Pneumatic Actuator is available in Double Acting Type or Single Acting Type. Double Acting Pneumatic Actuator Butterfly Valve Uses Air to Open and Air to Close. Where Single Acting Air Actuator Butterfly Valves uses Air Pressure to open and Springs to close the valve (failsafe) Closed

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Pneumatic Butterfly Valve:

Body Extruded Aluminium Hard Anodized for Corrosion Protection & Wear Resistance.
Actuator Compact Modular Design Provides Direct Mounting on Butterfly Valves.
Lightweight due to their Compact Rack And Pinion Construction, Low Friction Piston and Rings Provide Maximum Efficiency and Long Life in Working Cycle
Quick opening & closing
Actuators Have High Bore Finished and are Factory Lubricated for Good Life Cycle in Normal Conditions.

Material Option Of Our Pneumatic Butterfly Valve:

Size: 40 Mm To 500 Mm – 2 “- 20”
Body: C.I, D.I, Wcb, Cf8, Cf8M, Gm, Is 2062 Gr. M.S.- Fabricated
Disc: Sgi, Di, S.S.410, Wcb,Cf8, Cf8M, Aluminium Bronze, Nylon Coated
Shaft: S.S. Aisi 410, Ss304,Ss316,Monel
Seat: Nitrile,Epdm,Ptfe, Hyplon, Silicon, Viton, Metal To Metal
Pressure Rating: Ansi 125 #, 150 #, 300 #,
Ends: Wafer Type, Double Flange, Lugged Type
Leakage: Tight Shut-Off To Class Vi
Manual Operation: Can Be Provided As An Additional Feature
Accessories: Air Lock Relay, Pneumatic To Pneumatic Valve Positioner, Electro-Pneumatic Valve Positioner With In Build Position Indicator, Rotary Limit Switches, Proximity Switches Solenoid Valves

Manufacturer & Suppliers of Wafer Type Check Valves With Heavy Duty and High Quality. These Wafer Check Valves are made from Bar Stock Single Piece Design, This have Short Pattern Wafer Type Body Conforming to API6D and ASME B 16.10 Face To Face Dimension.

The Body out Side Diameter and Thickness is As per Pressure Rating and Class like PN 10 PN 16 ANSI #150 BS 10 Table D/ E. These Valves are Suitable for Mounting between Flange Weld Neck type and Slip on Matching Companion Flanges as Per Standards.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Wafer Check Valve:

Low Face To Face Dimension, Light In Weight, Economical And Easy Installation.
Suitable for Horizontal Flow and Also Vertical flow with Mounting of Heavy Spring Loaded type.
Body and Disc of Superior Quality, Single-Piece Construction Bar Stock Rod Machined, Give Long Functional Life
Tight Shut off, Low Maintenance, Single Moving Parts and Replaceable Seals.

Material Option Of Our Wafer Check Valve:

Size: 25 Mm To 600 Mm – 1 “- 24”
Body: C.I. Is 210 Gr Fg 200, M.S,Astm A 216 Wcb /Wc6//Wc9/Cf8
Clapper: S.G.I., Wcb,Cf8, Cf8M
Hinge Pin: Aisi 410 (13% Cr.),304 / 316
Clapper Seal “O” Ring: Nitrile, Epdm , Viton , Silicon , Ptfe
Body Seal: Nitrile, Epdm , Viton , Silicon , Ptfe
Lifting Eye: M.S.
Pressure Rating: Pn 10 – 1092, Pn 16 – Bs 10 Table D & E, Ansi #150
Temperature: Up To 220 °C As Per Material
Press Testing & F Tof: Api 598 & Asme B 16.5

Manufacturer and suppliers of Investment Casting Disc Check Valve Non Slam Check Valve or Non Return Valves. This Non Slam Check Valves are used in Water hammering Line and maintaining the Back Pressure in Piping System.

Our Non Slam Disc Check Valve are made of stainless steel which stand upto 300°C.

Features Of Our Non-Slam Disc Check Valve:

Proline Make Disc Check Valve (Non Slam Check Valve) Open And Closed Quickly Against The Opposite Flow Acting On Disc & Provide The Full Flow In Line
It Occupy Very Less Space And Provide Full Flow & Spring Will Prevent The Reverse Flow In Pipe Lines
Zero Leakage With Soft Seated, Light In Weight And Easy Installation
Testing Standard: API 598

Material Option Of Our Non-Slam Disc Check Valve

Size: 15 Mm To 200 Mm – ½ “- 8”
Body: Investment Casting S.S 304, S.S 316
Disc: Aisi 304, Aisi316 (Bar Stock / Castings)
Spring: Compression Type Stainless Steel
Pressure & Temperature: Pn 40 Up To 300°C
End Connection: Wafer / Screwed
Insp & Test Std: Api 598
Hyd-Test Pressure: Body : 854 Psig (60 Kg/Cm ²), Seat : 569 Psig (40 Kg/Cm ²)

Manufacturer & Suppliers of High Quality of Pneumatic Diaphragms Control Valves with Electro Pneumatic Positioner.

Our pneumatic Control Valves Flow Pattern are 2 Way / 3 Way Type. Flow Control Valves 2 Way are Design for On Off Type Control & 2 Way Modulating Type Control Valves. 3-ways as Mixing & Diverting Type of Media Passing from Line.

This High Performance Pneumatic Control Valves Are Design As Per Application to Application and can be machined as Per Required CV Values, Flow Rate and Pressure Drop For Pressure Controlling In Line and has Cage Balanced Guide Type Designed.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Pneumatic Control Valve:

Proline Make Pneumatic Control Valves has High Precise Accuracy in Regulating, Powerful thrust at high response speed.
Suitable For High and Low pressure and Temperature Lines with Low Noise Level
It has High Flow Capacity, Wide Range Ability, Low friction in performance / Low overall height and High reliability due to few moving parts in an assembly
Large Variety of Trims Design and Wide Selection of Actuator to meet Application flow Requirement of System.

Material Option Of Our Pneumatic Control Valve:

Type: 2 Way And 3 Way
Size: 15 Mm To 450 Mm – ½ “-18”
Pressure Rating: Ansi – 150 To 2500 Class Equivalent To Bs/ Din, Etc
Body Material: Cast Steel Ic-Wcb,Ss304, Ss16, Ss16L, Monel, Alloy 20,Hastelloy B/C, Duplex , Bronze Ect
Actuator Type: Diaphragm, Piston And Electric
Spring Range: 3-15 Psig (0.2 – 1.0 Kg/Cm²), 6-30 Psig (1.4 – 2.5 Kg/Cm²)
End Connection: Flanged / Swe / Bwe / Screwed (Bsp/Npt)
Diaphragm: Nitrile, Neoprene
Accessories: Valve Positioner-Pneumatic, Electro Pneumatic, Smart Positioner

PROLINE INDUSTRIAL VALVES is Manufacturer and Supplier of Wide Ranges And Various Types of Motorized Butterfly Valves Which Includes Electrical Actuator operated, MOV, On Off Type Actuator Operated, Modulating Type, Proportional Type, Electric Actuator & actuators butterfly valves.

Our vision is to provide world class valve automation to the market at a much cheaper cost and best quality. We also offer customization on our wide range of the industrial valves as it can be customized according to the client specifications and details

We are engaged in manufacturing, wholesaling and exporting of this valve. We have a team of professionals that together creates a highly growth conducive environment in our firm.With their remarkable efforts, we have mustered a widespread customer base from some of the major industries. With our ethical practices and moral standards, we have won a commendable position in the realm.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features:

IP 65, IP 67, IP 68 Protection Class, Dust Proof, Flame Proof, Water Tight Enclosure
Local position Indicator, Adjustable mechanical stoppers, Space Heater, Dry Potential Free Contact Output for Remote Place Feedback Indication Option.
Limit Switches (1 NO+1 NC)- 2 Nos. (Rating 10A – 250 VAC)
Auxiliary limit switches – (1 NO + 1NC) – 4NOs & Torque limit switches (1NO + 1NC) – 2NOs. (for Higher Models)
Positioner is available in field/panel mounted to accept 4-20mA/D-10 V DC control signal & Rx Output with Servo Controller
Local control station Integral Starter Optional On Request with Additional Access

Material Option:

Size: 15 Mm To 600 Mm – 1/2″-24” – stainless steel
Body: Ci/Sgi/Wcb/Ss 304/Ss316/Ss316Ll
Disc Material: Sgi/Ss 304/Ss316/Ss316L, Hyplon & Ptfe Coating On Disc
Seat Material: Nbr/Epdm/Hyplon/Viton/ Ptfe /Silicon
End Connection: Wafer Type To Suit 150#/ Lug Type/ Double Flanged Type
Working Pressure: Pn 6, Pn 10, Pn 16,Pn 40
Manufacturing Standard: Ansi, Bs, Din, Jis, Is, Api 598, Api 609/ Bs En 593 To Suit Ansi # 125/ 150/ 300 Table D & E, Is 6392, Awwa C-504
Seat Leakage Class: Tight Shut Off To Class Vi

Manufacturer and Supplier of Wide Ranges And Various Types of Motorized Ball Valves Which Includes Electrical Actuator operated Ball Valves, MOV Ball Valves, On Off Type Actuator Operated Motorized Ball Valves, Modulating Type Motorized Ball Valves , Proportional Type Motorized Ball Valve, Proportionate Type 4~20 mA Current Loop Motorized Ball Valves, 4~20 mA In put And Out Put Current Supply, Inching Duty Type MOV Ball Valves, Temperature Controlling Type Ball Valves, PID Controller Operated Motorized Ball Valves, Tank Water Level Sensor Controller Controlling Motorized Ball Valves, Wall Mounting Starter Controlling Motorized Ball Valves
WithPanel Controlling Motorized Ball Valves, Quick Opening and Closing with Heavy Duty Gear Box Mounting Motorized Ball Valves, Timer Controlling Motorized Ball Valves, Part Turn Electrical Actuator Motorized Ball Valve. Regulating Type Electrical Actuator Motorized Ball Valve, Single Phase, Servo Controller Operated Motorized Ball Valve, Remote Place operated, Single Phase 230 V
Also Three Phase 415 V, 24 V A.C/D.C, 110 V A.C Actuator Operated Motorized Ball Valves, Pressure Switches heart Signal Controlling Motorized Ball Valves, Screwed end, Flange end Socket Weld End Motorized Ball Valves, Forged steel Motorized Ball Valves, Quarter Turns Electrical Actuator Operated Motorized Ball Valves
All Major Application type of Motorized Ball Valves are Manufacturer and Supplier by Proline Industrial Valves Ahmedabad.

Features Of Our Motorized Ball Valve:

IP 65, IP 67, IP 68 Protection Class, Dust Proof, Flame Proof, Water Tight Enclosure
Local position Indicator, Adjustable mechanical stoppers, Space Heater, Dry Potential
Free Contact Output for Remote Place Feedback Indication Option.
Limit Switches (1 NO+1 NC)- 2 Nos. (Rating 10A – 250 VAC)
Auxiliary limit switches – (1 NO + 1NC) – 4NOs & Torque limit switches (1NO + 1NC) – 2NOs. (for Higher Models)
Positioner is available in field/panel mounted to accept 4-20mA/D-10 V DC control signal & Rx Output with Servo Controller
Local control station Integral Starter Optional On Request with Additional Accessories

Material Option Of Our Motorized Ball Valve:

Size: 15 Mm To 500 Mm – 1/2″-20”
Body: Astm A216 Gr. Wcb / Astm A351 Gr.Cf 8-Cf8M
Ball: Astm A351 Gr. Cf 8 – Cf 8M
Stem: Stainless Steel Aisi 304/Aisi 316/Aisi 410
Seat & Seals: Ptfe (Glass Filled, Carbon Filled Teflon – Optional In Case Of High Temp.)
End Connection: Screwed To – Bsp / Npt, Flanged To -Ansi B16.5 Tabled, E,F,(On Request), Triclover Ends, Socket Weld – On

Manufacturer & Suppliers of High Quality of out Side Screw and Yoke type Bolted Bonnet Motorized Gate Valve, Non Rising Stem Motorized Sluice Gate Valves. Motorized Main Steam line Stop Valve with motorized Bypass Arrangement. Multi-turn Electrical Actuator with Integral Starter Unit Controller Operated From Remote Control Operation.

This Automated Electro Gate Valve is been Used for Various Automation Fields for Remote Controlling through PLC Operation, Electrical Gate Valves have long Life in working Cycle. This High Performance MOV Gate Valves are Design as Per Application to Application.

We have Wide Selling Network in India’s Major Cities for All Types of Motorized Gate Valve in Delhi, Mumbai, Kolkata, Punjab, Chennai, Bangalore, Pune, Indore, Hyderabad & Rajasthan. Our Products are made As per International Standards, High Export Quality, and Quick delivery to full fill the needs of all Types of Industries.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Motorized Gate Valve:

IP65 IP67 or IP68 NEMA 6, Rated for Weather Proof Out Door Environment, Water Tightness, Corrosion Resistance, Submersion Rating and Flame Proof.
Auxiliary Limit Switches for feedback (2 NO+2 NC) Rotary Roller Type 2X SPDT, Self locking and adjustable Type, Torque Switch for Over Torque Protection 2X SPDT Type, Manual Over Ride, Local Controlling Integral Starter Optional, 4-20mA Input Signal, 4-20mA Feedback Out Put Signal, Position Indicator, Servo Controller Wide Optional Are Available.
Squirrel Cage Induction Motor With Class F Insulation Temperature Rise Limited to class B To Give Burnt Out Protection And Design For Full Voltage Direct Online Start, With 6 Times of Full Load Current
Metal Gear box, De clutch Manual Override Hand wheel with Interlock and Arrow Marked For Rotation

Material Option Of Our Motorized Gate Valve

Size: 25 Mm To 900 Mm – 2″-36”
Pressure Rating: Asa – 150 – 300- 600- 800- 900-1500-2500 Class
Body: Cast Steel Ic-Wcb, Forged Steel,Ss304, Ss16, Ss16L
Gate: C.S,Ss 304,Ss316 Internal, Full Stelliting Wedge
End Connection: Flanged / Swe / Bwe / Screwed (Bsp/Npt)
Design & Insp: Api-600 / Api-6D / Asme B16.34 / Bs-1873 / Bs-1868 / Api-602 / Bs-5352
Operation Type: Hand Wheel Type, Gear Operated And Electrical Actuator

Manufacturer & Suppliers of High Quality of Motorized Knife edge Gate Valve. This Automated Electro Knife edge Gate Valve is been Used for Various Automation Fields for Remote Controlling through PLC Operation. Electrical Knife Edge Gate Valves have long Cycle Life. This High Performance MOV Knife Edge Gate Valves are Design as Per Application To Application Design.

We have Wide Selling Network in India’s Major Cities, for All Types of Motorized Knife Edge Gate Valve in Delhi, Mumbai, Kolkata, Punjab, Chennai, Bangalore, Pune, Indore, Hyderabad And Kerala. Our Products are made As per International Standards, High Export Quality, and Quick delivery to full fill the needs of all Types of Industries.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Motorized Knife Edge Gate Valve:

High Accuracy Degree Machined at Bottom Ultra Thick Gate and Lapped Integral to Prevent 100 % Leakage Bubble-Tight Shut-off Knife Edge Gate Valves in Sealing.
IP65 IP67 or IP68 Rated for Water Tightness, Corrosion Resistance, Submersion Rating and Flame Proof.
Limit Switches for feedback (2 NO+2 NC), Over Torque switches (2 NO+2 NC), Manual Over Ride, Local Controlling Integral Starter Optional, 4-20mA Input Signal, 4-20mA Feedback Signal, Position Indicator, Servo Controller All Features are Available
Various Features Included Proline High performance Heavy Duty One-Piece body casting, renewable seat type, Optional Seat Ring, Replaceable Seat Design, rugged stainless steel Thicker gate, hardened trim, full port design for greater flow capacity and minimal pressure drop in Proline Make Knife edge Gate Valves

Material Option Of Our Motorized Knife Edge Gate Valve:

Size: 50 Mm To 900 Mm – 2″-36”
Body Material: Cast Iron, Ductile Iron, Ic-Wcb,Ss304,Ss316,Ss316L
Gate Material: M.S,Ss 304,Ss316,Ss316L,Nitriding,Stelliting
Seat Material: Ptfe Teflon, Epdm,Viton, Silicone, Metal To Metal, Soft Seating
End Connection: Full Lugs, Wafer Type, Flangeless, Double Flanged Type
Drilling: As Per Ansi B 16.5 / Bs / Din / Jis / Is Standard, Rest On Request
Design & Insp: Ms Sp 81 Design Standard And Api 598
Operation Type: Hand Wheel Type, Gear Operated, Pneumatic Cylinder, Electrical Actuator

Manufacturer & Suppliers of High Quality of Motorized Globe Control Valves. This Automated Electro Globe Control Valve is been Used for Various Automation Fields for Remote Controlling through PLC Operation.

Globe valves are available in two categories, conventional and angle globe.  These control valves feature integral top mount positioners; pneumatic,  analogue and digital.  Motor operators are also available for both on/off and positioning control.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Motorized Globe Control Valve:

IP65 IP67 or IP68 NEMA 6, Rated for Weather Proof Out Door Environment, Water Tightness, Corrosion Resistance, Submersion Rating and Flame Proof.
Auxiliary Limit Switches for feedback (2 NO+2 NC) Rotary Roller Type 2X SPDT, Self locking and adjustable Type, Torque Switch for Over Torque Protection 2X SPDT Type, Manual Over Ride, Local Controlling Integral Starter Optional, 4-20mA Input Signal, 4-20mA Feedback Out Put Signal, Position Indicator, Servo Controller Wide Optional Are Available.
Squirrel Cage Induction Motor with class F Insulation Temperature Rise Limited to class B To Give Burnt Out Protection And Design For Full Voltage Direct Online Start, With 6 Times of Full Load Current
Metal Gear box, De clutch Manual Override Hand wheel with Interlock and Arrow Marked For Rotation

Material Option Of Our Motorized Globe Control Valve:

Size: 25 Mm To 900 Mm – 2″-36”
Pressure Rating: Asa – 150 – 300- 600- 800- 900-1500-2500 Class
Body Material: Cast Steel Ic-Wcb, Forged Steel,Ss304, Ss16, Ss16L
Plug Material: C.S,Ss 304,Ss316 Internal, Full Stelliting Seat
End Connection: Flanged / Swe / Bwe / Screwed (Bsp/Npt)
Design & Insp: Api-600 / Api-6D / Asme B16.34 / Bs-1873 / Bs-1868 / Api-602 / Bs-5352
Operation Type: Hand Wheel Type, Gear Operated And Electrical Actuator

Proline Industrial Valves Manufacture & Suppliers of Wide Ranges Of Motorized Damper Valves. These Damper Valves Are Mainly Design For High Temperature Air Lines, Combustion Flue Gas Line. These Damper Butterfly Valves Can be Lever Handle Operated Damper Valve, Worm Gear Box Operated Damper Valves, Motor Operated Damper Valve, And Pneumatic Air Actuator Operated Damper Valves.

Motorized Damper Valves Are In Circular Shapes Rectangular Shapes and Also Fabricated Customized As Per Sizes And Shapes With High Quality Of Material Like Mild Steel, Galvanized Iron Sheet, Aluminum Sheet, Iron And Steel Channels & Pipes. Damper Butterfly Valves Are Mainly Used In Hot Furnace Air Lines, Flue Gas Scrubber, Exhausts And Recycling Of Air In Chambers. These are non sealing due to high temperature air passing and also light in weight.

Various Types Of Motorized Motor Operated Damper Valves Which Includes Electrical Actuator Operated Damper Butterfly Valves, Mov Guillotine Dampers Valves, On Off Type Multi Lower Dampers Valves, Pneumatic Air Actuator Operated Damper Valves, Motorized Flap Gate Type Damper Valves, Slide Gate Type Fabricated Damper Valves, Motorized Isolation And Regulating Damper Valves. Motorized HVAC Rotary Air Damper Actuator, HVAC Liner Motion Actuator, Electronic Fail-Safe Damper Actuators, Non-Spring Return Actuators, Spring Return Damper Actuators, Fire And Smoke Damper Actuators Suitable For HVAC And All Damper Valves. Rotary Combustion Actuator are Used In Fuel Lines Line For Boilers Ignitions. Motorized On Off Type Damper Valves With Rotary Actuator Travel 0 To 90 Degree In Motion, Also Motorized Modulating Damper Valves Optional Supply Of 4-2mA Or 2-10v Dc Supply Input And Output Signal, Motorized Damper Valves Controls With SPDT Floating Switch, Proportionate Type 4~20 mA Current Loop Motorized Damper Valves. Also Multi Turn Actuator Operated Slide Gate Flap Gate Damper Valves With Heavy Duty Gear Box Mounting Regulating Type And Proportional Type Motorized Damper Valves, Modulating Type 0-10vdc Or 4-20mA Positioning Electric Power Control Motorized Damper Gate Valves

We have Wide Selling Network in India’s Major Cities for All Types of Motorized Damper Valves in Delhi, Mumbai, Kolkata, Punjab, Chennai, Bangalore, Pune, Indore, Hyderabad & Kerala. Our Products are made As per International Standards, High Export Quality, and Quick delivery to full fill the needs of all Types of Industries.

Manufacturer of Wide Ranges of All Types of Butterfly Valves as per Application to Application Design of Flow Control Industry needs. We have huge set up for Butterfly Valve and Has In House facilities like Foundry Inward Raw Material Inspection, Testing, Machining, Assembling, Final Inspection, painting & generally ready Stock of Butterfly Valves.

We have Wide Selling Network in India’s Major Cities for All Types of Butterfly Valves in Delhi, Mumbai, Kolkata, Punjab, Chennai, Bangalore, Pune and Hyderabad. Our Products are made As per International Standards, High Export Quality, and Quick delivery and full fill the needs of all Types of Industries.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Butterfly Valve:

Body Casting of Superior grade, additional Strength, maximum Flow Capacity with Lowest Pressure Drop, High Pressure Rating , Extended neck Design are Provided
Thru-stem design with high strength and Unique Stem retention system to provide blow-out proof stem, One piece stem with close tolerances double D drive Design In Handle eliminates the need for disc screws or taper pins, self-adjusting stem seal, suitable for vacuum And Square Made as per direct mounting of all kind of actuators
Nylon coated high strength disc with Round, polished disc edge and hubs ensures excellent corrosion resistance, Low Torque and Bi-directional flow Type Centric Disc Design
Molded-in resilient seat provides 100% bubble-tight shutoff, zero leakages, concentric seating, lower torques and longer seat life. integral Molded Seat with body

Material Option Of Our Butterfly Valve:

Size: 50 Mm To 900 Mm – 2″-36”
Body Material: Cast Iron, Ductile Iron, Ic-Wcb,Ss304,Ss316,Ss316L
Gate Material: M.S,Ss 304,Ss316,Ss316L,Nitriding,Stelliting
Seat Material: Ptfe Teflon, Epdm,Viton, Silicone, Metal To Metal, Soft Seating
End Connection: Full Lugs, Wafer Type, Flangeless, Double Flanged Type
Drilling: As Per Ansi B 16.5 / Bs / Din / Jis / Is Standard, Rest On Request
Design & Insp: Ms Sp 81 Design Standard And Api 598
Operation Type: Hand Wheel Type, Gear Operated, Pneumatic Cylinder, Electrical Actuator

Manufacturer & Suppliers of Handle Operated Ball Valves and Gear Operated Ball Valves. Our valve are Bi–directional Valve with Zero Leakage at Maximum Rated Pressure. The Ball valves are Design like Single Piece Ball Valve, Two Piece Ball Valve, and Three Piece Design Ball Valve, With Flow Pattern are 2 way Ball Valves, 3 way Ball Valves and 4 Way Ball Valves.

Single Piece Design Ball Valve is Investment Casting WOG 1000 Series PN 40 Rating, Heavy Duty and High Pressure Rating Single Piece Ball Valves. These are Full Bore Blow-Out Proof Stem with Floating Ball Soft Seated Design with Internal Solid Ball Inside.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Ball Valve:

Ball Valves Give Greater Flows, Wider Media Compatibility.
Ball Valves Has Both Side Seals Covered of Internal Ball, And Can Give Tight Shut Off After Years of Cycle Operation.
High Grade of Material Used, Easy To Operate, Long Life, Less Maintenance
High Quality Seals Used and Multiple Stem Sealing with O- Rings Makes Valve Tight Shut off in also Vacuum Condition.

Material Option Of Our Ball Valve:

Flow Pattern: 2 Way, 3 Way, 4 Way & 5 Way
Size: 8 Mm To 400 Mm – ¼ “- 16”
Body: C.I,Wcb, Cf8, Cf8M, P.P, Upvc, Lined,Brass, Fcs
Ball: Aisi S.S, Cf8, Cf8M, P.P, Upvc, Lined, Forged
Shaft: Aisi S.S 410, 304, 316, 316L, K500 Monel
Seat: Rptfe, Teflon, Peek,Gft, Metal To Metal
Pressure Rating: Ansi 125 #, 150 #, 300 #, 800#
Ends: Screwed Type, Socket Weld Type, Flanged Type, Tc End
Leakage: Tight Shut- Off To Class Vi
Operation: Hand Lever Operated, Gear Operated And Actuator Operated

Manufacturer & Suppliers of High Quality of Manual Knife Edge Gate Valves. This Handle Operated Knife Gate Valve is been Used for Slurry Line, Sewage Waste water, Viscous Liquid, Molasses Application, heavy Load Vessel and High Temperature Line For Various Application.

These are Generally Mounting Vertical and Horizontal Position under the Conical Cone Shape Vessel Tank, Below Hopper, Pressure Vessel and high load Vessel for shut off valve in Line.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Knife Edge Gate Valve:

High Accuracy Degree Machined at Bottom Ultra Thick Gate and Lapped Integral to Prevent 100 % Leakage Bubble-Tight Shut-off Knife Edge Gate Valves in Sealing.
Body Casting of Superior grade, additional Strength Investment Casting One-Piece body casting, Replaceable Seat Design, Optional in Seat Ring, rugged stainless steel Highly Lapped Thicker gate and Various Type of hardened trim Available
Easy Installation and Maintenance
Full port design maximum Flow Capacity for greater flow capacity and low pressure drop Available in Proline Make Knife edge Gate Valves

Material Option Of Our Knife Edge Gate Valve:

Size: 50 Mm To 900 Mm – 2″-36”
Body Material: Cast Iron, Ductile Iron, Ic-Wcb,Ss304,Ss316,Ss316L
Gate Material: M.S,Ss 304,Ss316,Ss316L,Nitriding,Stelliting
Seat Material: Ptfe Teflon, Epdm,Viton, Silicone, Metal To Metal, Soft Seating
End Connection: Full Lugs, Wafer Type, Flangeless, Double Flanged Type
Drilling: As Per Ansi B 16.5 / Bs / Din / Jis / Is Standard, Rest On Request
Design & Insp: Ms Sp 81 Design Standard And Api 598

Manufacturer & Suppliers of High Quality of Out Side Screw and Yoke Type Bolted Bonnet Rising Stem Globe Valves. Globe Valves are mainly used for Throttling Application as a Flow Control Valves.

Globe Valves has Low-Flow Coefficients, Globe Valves Can Maintain High-Pressure Drop. These Globe Valves are also, Used for Main Steam High-Pressure Lines as Stop Valve with Bypass Arrangement Globe Valve.

Cast Steel Globe Valve Are Available In Wide Ranges, Sizes And Pressure Rating. These Globe Valves Are Been Used for Variety of Fluid, for frequent cycling to control the Flow.

Our Globe Valves Have Long Life In Working Cycle, this High-Performance Globe Valves Are Design As Per Application to Application and can be machined as Per Required CV Values, Flow Rate, and Pressure Drop, Pressure Controlling With Number of Seat and Plug Present and Important Cage Balanced Guide Type Designed.

We manufacture, supply and export in anywhere India & UAE with the fastest delivery option.

Features Of Our Globe Valve:

Proline Industrial Valves High performance Globe Valve are Heavy Duty with Higher Graded Casting Quality, Heavy Pattern and Rugged Plug with High Lapped Finished in Combination with Seat for Longer Life.
High Accuracy Degree Machined at Plug and Seat Areas with Cage Balance Guide Design for Throttling Application and Meeting The Required Flow Parameters.
Thicker Plug, Hard Face Seat Type, Greater Control, in Flow, High-pressure Drop and High Accuracy to meet the Flow Control Parameters.
Available in Hand wheel Operated Globe Valve, Gear Box Operated Globe Valves and Electrical Actuator Operated Globe Valves.

Material Option Of Our Globe Valve:

Size: 25 Mm To 900 Mm – 1″-36”
Pressure Rating: Asa – 150 – 300- 600- 800- 900-1500-2500 Class
Body Material: Cast Iron,Cast Steel Ic-Wcb, Forged Steel,Ss304, Ss16, Ss16L
Seat Ring: Hardfacing Stellite # 6 Optional
End Connection: Asme Flanged B 16.5 /16.10/16.34 / Swe B 16.11 / Bwe B 16.25 / Screwed (Bsp/Npt)
Design & Insp: Api-600 / Api-6D / Asme B16.34 / Bs-1873 / Bs-6755 P1 / Api-598 / Bs-5352
Operation Type: Hand Wheel Type, Gear Operated And Electrical Actuator Operated

Manufacturer & Suppliers of Swing Type Check Valves and Piston Lift Up Check Valves. These NRV Non Return Valves are Bolted Cover Design, with Straight Type Body with Flanged ends and Screwed Ends. Swing Check Valves are Suitable for Horizontal flow or Vertical flow flowing from bottom to (Fluid Flowing Upward) Pipe Layouts. Lift Type Check Valve Bolted Cover, Are Only Suitable for Horizontal Line.

Proline Industrial Valves also Makes Special Swing Type Check Valves with by Pass Arrangement Valve and With Stellited Seat to meet the Requirement for High Pressure and High Temperature Lines. IBR (Indian Boiler Regulation) And Non IBR Swing Type Check Valves with Third Party Inspection are also available. Proline Industrial Valves Makes Swing Type Check Valves With Teflon Seated For Low Vacuum Line. The Disc is Highly Lapped for its Long Life.

We manufacture, supply and export in anywhere India & UAE with fastest delivery option.

Features Of Our Swing Check Valve:

Proline Make Swing Type Check Valve (Non Return Valve) Suitable for Horizontal Or Vertical Lines (With Flow Up-Ward Direction)
Body and Cover Casting Of Superior Grade, One-Piece Construction Ultra Thick Disc, With Hard Faced High Accuracy Lapped To a Mirror Finish.
Light In Weight And Easy Installation With Replaceable Seat Arrangement Simple And Quick Maintenance
Greater Flow with No Pressure Drop

Material Option Of Our Swing Check Valve:

Size: 25 Mm To 600 Mm – 1 “- 24”
Body: C.I. Astm A 216 Wcb /Wc6//Wc9/Cf8 / Cf8M
Disc: Aisi 410 (13% Cr.) /Aisi 304/316/304L/316L
Seat: Aisi 410 (13% Cr.) /Aisi 304/316/304L/316L+ Stellite Optional
Hinge Pin: Aisi 410 (13% Cr.) /Aisi 304/316/304L/316L
Pressure Rating: 150# To 1500#
End Connection: Flanged End And Butweld End
Joint Gasket: Caf / B8 / Compressed Asbestos Fiber / Ss 304 Spire Wounded With Caf
Insp & Test Std: Bs 6755/Api 6D /Api 598
Special Type: With By-Pass Arrangement Valve On Request