Swam Pneumatics Private Limited

Economical and ideal for pneumatic conveying,blending and fluidizing of powdered or granular materials and aeration of liquids.The flow capacities upto 65,000 CMH and pressures upto 1.1 kg/cm2.

The blowers for high suction pressures are with mechanical seals and pressurized lubrication and other design change.

Capacity: Upto 65000 M3/Hr.,  Pressure : Upto 1.1 bar 'g',  Vac.- 0.5 bar

Static pressure upto 1800  mmwg in single stage,Higher static pressure by multi-staging.

ID / FD FANS

Suitable for positive conveying and negative suction.

Manufatured out of special materials for Gas conveying and fitted with Mechanical & Semi-mechanical seals.

 Capacity : Upto 400000 M3/Hr.,
Pressure : Upto 2100 mm WC in single stage

Gas boosters are used for circulation of gases for chemical processes. The gases handled are Hydrogen, Nitrogen, Oxygen, Biogas, Carbon-Di-Oxide, Methane, Mixed Gas, BF Gas, Coke Oven Gas etc. The boosters are fitted with improved sealing system to make it leak-proof. The mechanical seals are fitted, if application so warrants. The construction materials are special, depending upon the nature of gas.

Capcity: Upto 65000 M3 / Hr. ,      Pressure: Upto 1.1 bar ‘g’  

The vacuum boosters in combination with conventional Vacuum mechanical pumps boost high vacuum upto one micron. Ideal for low cost high displacement and vacuum from 50 Torr to one micron.

Capacity: Upto 52000 M3 / Hr.

Pressure: Upto 10-3 Torr in multi stage.

Swam dry screw vacuum pumps are designed under SWAM’s unique screw profile engineering to fulfill wide range of chemical and industrial processes. It is operating by rotating a paired screws that efficiently admit gases from inlet into the pump inside and compress through the screw’s swept volume toward the discharge.

Capacity: Upto 3500 M3 / Hr.
Pressure: Upto 0.01 Torr

Swam offers complete turnkey vacuum system packages with very high vacuums. The system consists of backup pump with vacuum boosters, condensers, gauges, switches, starter panels etc. Thus Swam ready to provide optional total package solution and will deliver package solution and will deliver package performance as per client requirements.

The Swam Transfer Fin Type Heat Exchangers are available in various sizes and parameters. The details of which would be given on request. Finned Tube Heat Exchangers are an ideal solution where low density, low heat transfer fluids are exchanged with a high heat capacity streams.

Capacity: As per requirement

Shell & tube type Heat Exchangers are built in a wide variety of sizes and capacities. The Heat Exchangers are fabricated as per TEMA / ASMEunfired pressure vessels codes & ASHRAE standard. Heat Exchangers for sea water marine application  or with steels shells are also offered and designed as also offered and designed as per customer specific requirement.

Capacity: As per requirement

Acoustic Enclosure comprises of modular structural frames made out of Steal Plates & Sheets and pre-fabricated sections for high performance acoustic panels.The enclosure is designed acoustically and mechanically to the desired noise level specified by the customer. The thickness of the panel is based on the design requirement.

Capacity: As per requirement

These exchangers are extensive used in various industries such as chemical process, pharmaceutical petrochemicals, fertilizers, edible oil industries, paper & pulp and power for heat recovery applications

Swam offers a complete Turn Key service from concept, engineering and design, All the way to manufacturing, testing, installation and commissioning of various blower and vacuum applications.