Titan Bop Rubber Product Inc.

Rubber Products - Misc. - Hydril Style, Oteco Style, Elevator balancing straps, tong pullback straps

Rubber Products - Misc. - Casing thread protectors. For Casing sizes of 4-1/2" - 30". In Klamp-on and air operated (Klepo) styles.

Strippers - Bowen style coil tubing strippers are designed to pack-off on coiled tubing as it is stripped in and out of the hole at well pressures up to 8,000 psi. This conventional unit uses the standard 4 inch diameter "interlock" packer elements which can be easily changed by removing the top entry split cap and using hydraulic pack-off pressure to expose the packer for quick replacement. These are available in dual compound top loads.

Packers - Cameron style D & DL packer and donut assemblies.

Sizes:
7-1/16" 10M
11" 5M
11" 10M
13-5/8" 5M
13-5/8" 10M

We can offer aftermarket (non-OEM) and OEM products.

(BOP Rubbers, Packing Units, Blowout preventer, BOP Elements, Elastomers, Seals, Face Seals)

Strippers - Double E stripper rubbers efficiently remove oil & other fluid from the rod string being pulled from the well. The specially formulated rubber compound has superior abrasion and wear resistance which ensures greater service life.

Packers - We offer packing elements for the following annular BOPs in aftermarket (non-OEM) and we can also quote from the OEM:

Cameron Style D & DL

Shaffer style Spherical (SBOP)

Hydril style GK, MSP, GL (OEM), GX (OEM)

Sizes range from 7-1/16" - 30". Material available are nitrile (NBR) and natural rubber (NR).

Seals - Hydril style GK & MSP annular seal kits.

Sizes:
GK
7-1/16" 3M, 5M, 10M
9" 3M, 9" 5M
11" 3M, 5M, 10M
13-5/8" 3M, 5M, 10M
16-3/4" 5M

MSP
7-1/16" 2M
11" 2M
21-1/4" 2M
29-1/2" 500 PSI

We stock aftermarket (non-OEM) parts but we can also offer OEM products.

(BOP Rubbers, Packing Units, Blowout preventer, BOP Elements, Elastomers, Seals, Face Seals)

Packers - Guiberson style H-1 ram packers and door seals.

(Ram Rubbers, BOP Rubbers, Ram Packers, Blowout preventer, Elastomers, Seals, Face Seals)

Swab Cups - Guiberson style swab cups and JU stripper rubbers.

Rubber Products - Misc. - Hydril style K-10 and K-20 pulsation dampener diaphragm bladders, stabilizer rubbers and repair kits. In NBR (nitrile), HNBR (hydrogenated nitrile) and Urethane material. We also offer the pressure gauges, charging valves, bottom plate gaskets, screws, washers and stabilizer plates.

We stock aftermarket (non-OEM) parts but we can also offer OEM products.

(K10, K20)

Pipe Wipers - Hydril, Oteco style Hex and Square Kelly pipe wipers.

10" OD Natural black rubber material
3-1/2", 4-1/2" and 5-1/2" ID

Fasteners - We offer retracting screws for the LWS and SL BOPs.

We specialize in aftermarket (non-OEM) parts but we can also offer OEM products.

(Ram Rubbers, BOP Rubbers, Ram Packers, Blowout preventer, Elastomers, Seals, Face Seals,)

Seals - Shaffer style ram shaft seal assemblies and various other seals for the LWS, SL, SLX, Chasovoy, LXT BOPs.

We can offer aftermarket (non-OEM) and OEM products.

(Ram Rubbers, BOP Rubbers, Ram Packers, Blowout preventer, Elastomers, Seals, Face Seals)

Hydraulic Cylinders - We offer replacement locking shafts, manifolds, ram shafts, cylinders, pistons, hinge bracket assemblies and much more for all blowout preventers (BOPs) including:

Shaffer style LWS, SL, LWP, LXT, Sentinel I & II, and Chasovoy BOPs.
Cameron style Type U BOPs
Hydril style Sentry, Type V, and Type X BOPs
And also WSI (Wellsite Services), Guiberson H-1, IEI (Integrated Equipment), Townsend Type 81, T3 & Axon.

We specialize in aftermarket (non-OEM) parts but we can also offer OEM products.

(Ram Rubbers, BOP Rubbers, Ram Packers, Blowout preventer, Elastomers, Seals, Face Seals,)

Packers - Shaffer style multiram blocks, packers and top seals for LWS, SL and LXT BOPs. Sizes are 7-1/16", 11", 13-5/8". We stock aftermarket (non-OEM) parts but we can also offer OEM products.

(Ram Rubbers, BOP Rubbers, Ram Packers, Blowout preventer, Elastomers, Seals, Face Seals)

Valves - Misc. - Pulsation dampener parts - pressure gauge, charging valve, screw, lock washer, nozzle, bottom plug, stabilizer plate, bottom plate gasket. For the Hydril style K10, K20 and Continental Emsco style PD45 and PD55 dampeners.

(PD-45, PD-55, PD-55A, K-10, K-20)

Packers - Cameron style 6" (7-1/16") 3-5M QRC Ram Packers.

(Ram Rubbers, BOP Rubbers, Ram Packers, Blowout preventer, Elastomers, Seals, Face Seals)

Fasteners - B7 Studs and Tap Ends. Ring gaskets offered in low carbon steel/soft iron or stainless steel.

Rubber Products - Misc. - Rubber expansion joints provide a time-tested way to convey fluids in both pressurized and vacuum systems.

Expansion Joints are used for compensation of pipeline movements and vibrations. Similar to a tire, it has layers of high-quality elastomers reinforced with steel wires and synthetic fabrics.

Packers - Cameron Type U Style SBR side and blade packers. We also offer DS/ISR style shear ram rubbers. We stock aftermarket (non-OEM) parts but we can also offer OEM products.

(Ram Rubbers, BOP Rubbers, Ram Packers, Blowout preventer, Elastomers, Seals, Face Seals)

Seals - Kemper Seal-O-Grip style Air Grip Union Tubes are air-inflated connectors for low-pressure fluid or mud suction return lines. They are made of an inflatable oil-resistant (Nitrile) tube.

Sizes available: 4", 6", 8", 10", 12" & 16".

Hydraulic Cylinders - We offer replacement locking shafts, manifolds, ram shafts, cylinders, pistons, hinge bracket assemblies and much more for all blowout preventers (BOPs) including:

Shaffer style LWS, SL, LWP, LXT, Sentinel I & II, and Chasovoy BOPs.
Cameron style Type U BOPs
Hydril style Sentry, Type V, and Type X BOPs
And also WSI (Wellsite Services), Guiberson H-1, IEI (Integrated Equipment), Townsend Type 81, T3 & Axon.

We specialize in aftermarket (non-OEM) parts but we can also offer OEM products.

(Ram Rubbers, BOP Rubbers, Ram Packers, Blowout preventer, Elastomers, Seals, Face Seals,)

Rubber Products - Misc. - Shaffer style Spherical (SBOP) annular packing elements. Nitrile (NBR) or natural (NR).
Sizes:
7-1/16" 3M, 5M, 10M
9" 3M
11" 3M, 5M, 10M
13-5/8" 3M, 5M, 10M
21-1/4" 2M & 20-3/4" 3M

We stock aftermarket (non-OEM) parts but we can also offer OEM products.

(BOP Rubbers, Packing Units, Blowout preventer, BOP Elements, Elastomers, Seals, Face Seals)

Seals - Shaffer style Spherical (SBOP) annular seal kits with the hard band wipers seals.
Sizes:
7-1/16" 3M, 5M, 10M
9" 3M
11" 3M, 5M, 10M
13-5/8" 3M, 5M, 10M
21-1/4" 2M & 20-3/4" 3M

We stock aftermarket (non-OEM) parts but we can also offer OEM products.

(BOP Rubbers, Packing Units, Blowout preventer, BOP Elements, Elastomers, Seals, Face Seals)

Strippers - Stripper rubbers for Texas short hall, BIW, Washington, Grant heads.

Packers - Shaffer style Type 39, Type 48 and Type 480 ram packers.

(Ram Rubbers, BOP Rubbers, Ram Packers, Blowout preventer, Elastomers, Seals, Face Seals

Steel - Shaffer style Type 70 and Type 75 ram blocks for LWS and SL BOPs.

Shaffer style LXT, LWP, Chasovoy, Sentinel I & II ram blocks.

We can offer aftermarket (non-OEM) and OEM products.

(Ram Blocks, BOP Rams, Ram Bodies, Rams, Blowout preventer, Elastomers, Seals, Face Seals)

Packers - Shaffer style Type 70 and Type 75 ram packers and seal kits for LWS and SL BOPs.

We also offer ram packers for the Chasovoy, LXT, Sentinel II, and LWP BOPs.

We can offer aftermarket (non-OEM) and OEM products.

(Ram Rubbers, BOP Rubbers, Ram Packers, Blowout preventer, Elastomers, Seals, Face Seals)

Rubber Products - Misc. - Cameron style F Type cup tester assembly. We offer test cups as well as the complete assembly with sub and mandrel. Cup materials include nitrile (NBR) and urethane.

Pipe Wipers - Hydril, Oteco style pipe wipers in natural rubber (NR) and nitrile blend (NBR) material. Sizes from 9" to 36" in flat/single and split dual. ID cut for any drill pipe OD. Hex and square kelly wipers offered as well.

9" Flat/Single, Low Profile, Split Dual Natural black
10" Square and Hex Kelly Natural black
12" Flat/Single, Low Profile, Split Dual Natural black
14" Flat/Single, Low Profile, Split Dual Natural & Nitrile (black and
red)
17" Flat/Single, Split Dual Natural & Nitrile (black & red)
19" Flat/Single, Split Dual Natural & Nitrile (black & red)
22" Flat/Single, Split Dual Natural & Nitrile (black & red)
24" Flat/Single, Split Dual Natural & Nitrile (black & red)
26" Flat/Single Natural & Nitrile (black & red)
36" Flat/Single Natural & Nitrile (black& red)

Rubber Products - Misc. - Guiberson Style Type H Oil Saver Rubbers.
Colors: Blue, Green, Red, Black
Hardness: 35-55°

Packers - Cameron style Type U ram packers (face seals, front packers, ram rubbers), top seals and seal kits. We stock aftermarket (non-OEM) parts but we can also offer OEM products. Sizes from 7-1/16" - 21-1/4". 

(Ram Rubbers, BOP Rubbers, Ram Packers, Blowout preventer, Elastomers, Seals, Face Seals)

We offer replacement locking shafts, manifolds, ram shafts, cylinders, pistons, hinge bracket assemblies and much more for all blowout preventers (BOPs) including:

Shaffer style LWS, SL, LWP, LXT, Sentinel I & II, and Chasovoy BOPs.
Cameron style Type U BOPs
Hydril style Sentry, Type V, and Type X BOPs
And also WSI (Wellsite Services), Guiberson H-1, IEI (Integrated Equipment), Townsend Type 81, T3 & Axon.

We specialize in aftermarket (non-OEM) parts but we can also offer OEM products.

(Ram Rubbers, BOP Rubbers, Ram Packers, Blowout preventer, Elastomers, Seals, Face Seals,)

Gaskets - Bonnet seals (door seals, bonnet gaskets) for all blowout preventers (BOPs) including:
Shaffer style LWS, SL, LXT, Sentinel I & II, and Chasovoy BOPs.
Cameron style Type U, QRC BOPs
Hydril style Sentry, Type V, and Type X BOPs
And also WSI (Wellsite Services), Guiberson, IEI (Integrated Equipment), Townsend, T3 & Axon.

We stock aftermarket (non-OEM) parts but we can also offer OEM products.

(Ram Rubbers, BOP Rubbers, Ram Packers, Blowout preventer, Elastomers, Seals, Face Seals,)

Packers - Hydril style Type V, Type X, Sentry & Workover ram packers and top seals.

Sizes:
7-1/16" 5M
11" 5M
13-5/8" 5M
13-5/8" 10M

We can offer aftermarket (non-OEM) and OEM products.

(Ram Rubbers, BOP Rubbers, Ram Packers, Blowout preventer, Elastomers, Seals, Face Seals)

Packers - Cameron style Type U VBR ram packers and top seals. Sizes from 7-1/16" to 16-3/4". We stock aftermarket (non-OEM) parts but we can also offer OEM products.

(Ram Rubbers, BOP Rubbers, Ram Packers, Blowout preventer, Elastomers, Seals, Face Seals)

Strippers - 1360 Series Washington style stripper rubber. Sizes 2-3/8", 2-7/8", 3-1/2", 4-1/2" and 5-1/2".

Rubber Products - Misc. - 7-1/16" 3/5M WSI Duke, Townsend Type 81 & Sentinel II Ram Packers & Top Seals.

(Ram Rubbers, BOP Rubbers, Ram Packers, Blowout preventer, Elastomers, Seals, Face Seals)

Rubber Products - Misc. - WSI Ram Block Assy. 7-1/16" 3/5M WSI Duke, Townsend Type 81, Shaffer Sentinel II, IEI (Integrated Equipment)

We have the following API 16A monogrammed, Type U ram block assemblies in stock and are offering very competitive pricing.

1 Set 11" 3-10M x 4-1/2" Type U Ram Assembly (644219-11)

1 Set 11" 3-10M x 3-1/2" Type U Ram Assembly (644219-08)

1 Set 11" x CSO 3-10M Type U Ram Assembly (644219-01)

1 Set 11" 3-10M TYPE U VBR 2-7/8" - 5" Ram Sub Assembly (645360-01)

The ram rubbers are new aftermarket and are installed in ram blocks manufactured by an API16A facility. Certificate of conformance (COC) and all MTRs are included.

Call now for great pricing!

(Ram Blocks, BOP Rams, Ram Bodies, Rams, Ram Assemblies, Blowout Preventer, Elastomers, Seals, Face Seals, Pipe Rams, VBR Ram Assemblies)

Diaphragm bladder for BOP accumulator units. Bladders fit various different accumulator bottles including the Koomey style.

A Double Studded Adapter (DSA) has studs on each end and is used to connect flanges with different nominal sizes, pressure ratings and configurations. We can provide quick delivery on popular sized. Custom sizes can also be manufactured per your request.

Drilling Spools separate two components with equal sized flanged ends with side outlets. This pressure containing equipment is available in various sizes and/or pressure ratings.

The spools can be manufactured to meet API-6A requirements. Materials are compliant with NACE MR0175/ISO 15156 latest edition. Material Test Reports, Certificates and Complete Traceability are included with the product.

Spacer Spools separate two components with equal sized flanged ends by specified length. This pressure containing equipment is available in various sizes and/or pressure ratings.

The spools can be manufactured to meet API-6A requirements. Materials are compliant with NACE MR0175/ISO 15156 latest edition. Material Test Reports, Certificates and Complete Traceability are included with the product.

Adapter Spools separate two components with different sized flanged ends by specified length. This pressure containing equipment is available in various sizes and/or pressure ratings.

The spools can be manufactured to meet API-6A requirements. Materials are compliant with NACE MR0175/ISO 15156 latest edition. Material Test Reports, Certificates and Complete Traceability are included with the product.

Stripper Rubber for non-rotating diverters. Used for redirecting all drill cuttings and debris away from the rig to be safely discarded so as to maintain a clean working environment.