Compass Directional Services Ltd.


Compass Directional Services Ltd. strives to deliver enduring value for its stakeholders through safe, innovative, customer-focused solutions.



    Products & Services

Osiris Digital Directional Module

Osiris Digital Directional Module

OSIRIS DIGITAL DIRECTIONAL MODULE is a new tech directional MWD tool with 27 solid state smart sensors which can survive in harsh drilling environments.

OSIRIS DIGITAL DIRECTIONAL MODULE is equipped with 18 accelerometers (6 high range and 12 low range), 3 magnetometers, 3 axis vibration sensors, 2 temperature sensors, and 1 gyro sensor.

Specifications

Operating Temperature     0 - 175° C

Length                               29.2" (74.17 cm)

Diameter                            1.38" (3.5 cm)

Weight                               3.1 lbs (1.4 kg)

Vibration Qualification          20g RMS 15-500 Hz

Input Voltage                       9V - 40V

 

Vibration Dampener

Vibration Dampener

Features

  • Compensating piston maintains pressure across seals optimizing performance
  • Patented torque transmission and non-bevel design
  • Performs best placed close to the drill bit; but, with its unique design, it can be run anywhere in the drillstring.

Tool Dimesion

Length 23.375” / 59.3725 cm
Housing Diameter 1.875” / 4.7625 cm

Source - https://compass-mwd.com/aegeus-vibration-dampener/

Battery Module

Battery Module

The Compass Battery Module uses high-energy Lithium Thionyl Chloride double-D size batteries in a stack of eight with 150° C (302° F), 165° C (329° F), 180° C (356° F) temperature ratings available.

The cells are diode protected to prevent reverse power charges, and are protected by a 5 Amp fuse on the power line. The battery pack will run an MWD system for over 150 hours at a standard pulse rate with a Tensor Pulser, and 80 hours with a gamma probe added.

With an upgraded Compass Pulser, a battery pack will operate the MWD system for over 450 hours and over 300 hours with an added gamma probe.

Source - https://compass-mwd.com/battery-module/

Stepper Pulser

Stepper Pulser

Specifications

Min Flow Rate 35 gpm (2.2 L/sec) in water
Max Flow Rate 1,100 gpm (69 L/sec) in water
Max Operating Temperature 175° C (350° F)
Max Hydrostatic Pressure 20,000 psi (137.9 MPa)F)
Operating Voltage 20–29V
Nominal Current 4mA
Shock 1,000 g / 0.5 millisecond
Vibration 25g RMS 30-500 Hz random
30g 50-300 Hz Sine
Mud Sand Content <1% recommended
Poppet Push Force 60-280 lbs

Source - https://compass-mwd.com/stepper-pulser/

Directional Module

Directional Module

Specifications

Accurate directional measurements place the well in the target zone. This light weight system is easily mobilized for action with a rigid one piece chassis, 3 magnetometers and 3 accelerometers to measure well geometry accurately.

Tool Type Kintec & EZ-Link
Length 80" / 2.03 m
Weight 37 lb / 16.8 kg
Inclination ± 0.10 degrees, 3 sigma
Azimuth ± 0.25 degrees, 3 sigma
Tool Face Accuracy ± 1.0 degrees
Max Temperature 175° C (350° F) (150° C by request)
Max Hydrostatic Pressure 20,000 PSI (137.9 MPa)
Operating Voltage 18-32 V
Nominal Current 12 mA
Shock 1,000 g / 0.5 millisecond
Vibration 25g RMS 30-500 Hz random
20g all axis

Source - https://compass-mwd.com/apollo-directional-module/

 

Surface Gear

Surface Gear

Specifications

Operation Temperature –30 to 75°C
Extended Temperature –40 to 85°C
Dimension 16"x9"x2.25", Net Weight: 11 lbs
Case Dimension 20"x14"x5", Gross Weight: 17 lbs
Humidity 0% to 95%
  • Powerful mud pulse detection and decoding
  • Rugged design
  • Standard size and familiar layout
  • Long battery life up to 400 hours making it a great choice for deep and long runs
  • Compatible with popular MWD tools and transducers
  • Extra storage compartments for cables and other equipment
  • Lock down screws
  • Lightweight material, and handle for carrying
  • Protective feet on both sides of case
  • Supports popular MWD systems with graphic mud pulse display
  • Extra dip angle and gamma displayed
  • Extra synchronization indicator - reading of pump on, pump off, and synchronization status in dark
  • By using with KeyDrill Decoding System, gravity, magnetic field, pump pressure, battery, temperature and even the survey confidential number can be displayed
  • Built in Y-cable allows the RFD cable to transfer all pressure data and display data together
  • Compact rugged design
  • Highly reliable

Source - https://compass-mwd.com/surface-gear/

    Social Links

    Similar Companies