India-based Maximus Completion Systems is a manufacturer and supplier of oilfield tools. The company designs and manufacturers completion tools which are compliant to API & ISO guidelines. Maximus has a team which prepares instant quotes that can reach to the concerned person within 48 hours. It serves in many regions across the globe including North America, Western Hemisphere, Middle East & North Africa, Asia Pacific & North Africa.
The Magnus QLH Packer is retrievable, with a sleeve-type packing element. It is used at the bottom liner hanger and packer, or as a tension packer.
The Magnus QLH Packer is set by weight and is available with or without hold-downs.
The LH Packer with hold-down slips is a retrievable production packer which can be used to suspend pre-packed, drillable or conventional steel screens in flowing or pumping wells.
Quartus Liberty Liner Hangers have the ability to be rotated and/or reciprocated to bottom of well without fear of premature setting of the hanger slips due to enclosed & protective pockets which cover the slips till their roots and the slip wickers do not touch the surface directly. In other words, the design features a completely enclosed piston, setting sleeve and slip spring arrangement that prevents debris from setting in and around them, preventing a possible hanger failure. The Quartus Liberty Liner Hangers are available in both single and dual-cone version, the single-cone design allows for maximum bypass for circulating while maintaining the ability to hang short to medium length liners. The dual-cone design provides even greater bypass area and is capable of hanging medium to long liners.
Quartus MSL Liner Hangers are used to suspend cemented and un-cemented liners off bottom. Due to their heavy-duty construction, they are capable of successfully suspending very long and heavy liners off bottom. The Quartus MSL mechanical-set liner hanger is available with a one-piece integral barrel for maximum pressure integrity. A dual-cone version with dual set of slips alignment is also available for extra bypass and additional hanging capacity. Due to the added bypass area, pressure build-up is reduced during run-in and cementing, which reduces the chances of damage to pressuresensitive formations. Quartus MSL Liner Hangers are SET by picking up on the liner and rotating to disengage the J-Slot from its running-in position. As the liner is lowered, leaf springs holds the control body stationary. This action allows the barrel (mandrel) to move downward engaging the cone against the slips and further moving slips outward against the casing wall. Quartus MSL Liner Hangers are available in either left or right-hand-rotation set models.
Quartus RLH Rotating Liner Hangers are available in hydraulic and mechanical versions. The mechanical version is available in either left or right hands setting action. Increased Flow Area, Higher Cementing Integrity, provide maximum fluid bypass for easier running and lower circulating pressures. Quartus RLH Rotating Liner Hangers employs heavy-wall pipe materials that dramatically increase the pressure integrity of the hydraulic section. Slip & Cone outer barrel adds strength for increased collapse resistance, its design also has the ability to accommodate additional cones for greater hanging capacities. Quartus RLH Rotating Liner Hangers has a bearing designed for lengthy liner rotation. The heavy load bearing feature and the large bypass area improve displacement efficiency and cement bonding even in tight, eccentric holes. The heavy load bearing withstands the rotation of long, heavy liners for extended periods and will resist failure caused by high torque, and contamination by drilling fluids and well effluents.